Vacuum Controller for Rotary Film Evaporator
UD Technologies are leading manufacturer of Vacuum Controller for Rotary Film Evaporator
Generally,Organic solvents of Low Boiling points are used in Evaporation -Distillation of Rotary Film Evaporator.As a standard equipment ,Vacuum ejector or High vacuum pump is applied for evacuating .As a result ,Boiling point shall go down under vacuum .Sometimes even lower than available coolant temperature .Due to Higher vapor pressure ,solvent vapors drag in vacuum and results in solvent loss.
To deal with this scenario, we have developed Vacuum controller to set the vacuum such that boiling point of Solvent becomes higher than utility temperature to have better condensation and less solvent losses. It is a combination of Vacuum Transmitter, Controller and Electromagnetic valve along with Inbuilt Control Panel and Inside Pipe Work for vacuum. Valves shut off when Set Up vacuum achieves and Open when vacuum reduces due to vapor pressure in system up to Set vacuum. Vacuum Pump can be shut off if required (Optional) while Electromagnetic valve off i.e. during vacuum control cycle
Our vacuum controller is light and easy to use .Just connect between vacuum source and Rotary Evaporator and plug in .It shall control and offer desired vacuum.Vacuum can be set in most of Units.Chemist can set vacuum in required units.
1. Precise control of vacuum in distillation
2. Flexibility to set precise vacuum considering different vacuum-different vacuum pump capacity
3. Can set any units of vacuum preferable to you
4. Ready to use vacuum controller .Just attach hose pipes of vacuum source and distillation system and plu In power supply
5. Light weight
6. Can control vacuum from 5 liter to 50 liter volume
7.Facility of Aeration and vacuum release
UD Technologies also offer vacuum controllers for Production plants and large systems in flameproof also .
Please visit also for more products